LG H20J55DT Owner's Manual - Page 42

Installer Menu Use the Installer Menu to set up or change operational settings. See detailed descriptions of the Installer Menu items on the following pages Installer menu items can be accessed by using the optional installer's remote control. Just press and hold MENU (about 8 seconds) until the menu disappears, then press 9, 8, 7, 6, then OK (Enter). To remove the Installer's Menu, press OK repeatedly. Any changes you make will be stored in nonvolatile memory. The Installer menu opens with the main menu. Use MENU and Up or Down ADJ to sequence through the installer menus and submenus. Use Up or Down ADJ to scroll up/down within the menus and submenus. To change a setting, use the Left or Right ADJ keys. Press OK to return to the main menu. Using the Installer Menu Items 0-I ~ 117-I are accessible only in the Installer Menu. Their numbers, descriptions, ranges, factory default settings, and a place for listing any changes made on site are given below and on the following pages. The Factory Menu that is intended for qualified service technicians only, is not shown. XX-F Menu Items ( not shown here ) are service type adjustments and only qualified technicians having specialized test equipment should access them. INSTALLERS INSTALLER1  INSTALLER2 INSTALLER3 INSTALLER4 INSTALLER5 INSTALLER6 INSTALLER7 INSTALLER8 TV MICRO V3.00 D2A CARD V3.03 D2A CARD - MICRO COMM STATUS OK Menu Function Item Value Range 0-I. INSTALLER SEQ 0 - 3 1-I. POWER MANAGE 0 - 7 2-I. AC ON 0 / 1 3-I. BAND-AFC 0 - 7 4-I. STRT CHANNEL 0 - 255 Default Value 0 0 0 1 255 5-I. CHAN LOCK 0 / 1 0 6-I. GHOST CH 0 / 1 0 7-I. START VOLUME 0-63, 255 255 8-I. MIN VOLUME 0 - 63 0 9-I. MAX VOLUME 0 - 63 63 10-I. MUTE DISABLE 0 / 1 0 11-I. NOT USED 12-I. IR BANKS EN 0 / 1 0 13-I. SCAN MODE 0 / 1 1 14-I. STRT CH IN SM 0 / 1 0 15-I. SLEEP TIMER 0 / 1 1 16-I. EN TIMER 0 / 1 1 17-I. ALARM 0 / 1 1 18-I. NOT USED 19-I. NOT USED 20-I. FEATURE LEVEL 0 / 1 1 21-I. V-CHIP 0 / 1 1 22-I. MAX BLK HRS 0 - 99 12 23-I. CAPTION LOCK 0 / 1 0 Brief Description of Function and Comments Leave default set at 0. Sets number of hours of no activity before auto shutoff. Set to 1 to enable auto turn on at power up. Sets Tuning band for Analog channels. Channel at turn-on (255 for last Channel). For digital channels, use with item 101-I Start Minor Channel. When set to 1, cannot tune from current channel. Set to 1 to enable Ghost Channel display. Volume level at TV turn-on (Set 255 to retain last level). Minimum volume setting. Maximum volume setting. Set to 1 to disable mute function. Set to 1: enables TV to respond to IR codes to change Channel Bank directly. Puts TV On-Off event in Channel Up/Down sequence. Set to 1 to put TV on/off below start channel number. Set to 1 to enable Sleep Timer. Set to 1 to enable Timer. Set to 1 to enable Alarm. Zen 1 Leave default set 1 (1 Zen1). Set to 1 to enable V-Chip (Parental Control). Sets number of Parental Control blocking hours. Set to 1 to retain caption setting at turn off. Page 42 206-4065