LG H20J55DT Owner's Manual - Page 52
LT2002 QuickSet Clone Programmer
View all LG H20J55DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
LT2002 QuickSet Clone Programmer Use the QuickSet II "Clone" Programmer to copy the setup from a "master" TV then quickly transfer the setup to duplicate TV's; must be the same model number as the master TV. THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION XX THE TV IS VERSION XX THE SW IS REVISION XX CLONE CLOCK = XX:XX TV CLOCK = XX:XX - PRESS ANY KEY TO CONTINUE. - DISCONNECT CLONE WHEN DONE. Learn Master TV Setup Typical MPI Connections Antenna Typical TV Back RF Coxial Wire (75 ohm) Antenna Cable TV SPEAKER M.P.I. VIDEO IN SPEAKER OUT PILLOW SPEAKER AUDIO IN TV Back Panel (Expanded View) Connect cable to TV MPI Jack and follow on screen instructions Status Indicator MPI • green • red Color Reset battery ok battery low Blink pattern • slow power on no communications • heartbeat power on communications ok Teach Other TV the Setup Typical MPI Connections Antenna Typical TV Back RF Coxial Wire (75 ohm) Antenna Cable TV SPEAKER M.P.I. VIDEO IN SPEAKER OUT PILLOW SPEAKER AUDIO IN TV Back Panel (Expanded View) Connect cable to TV MPI Jack and follow on screen instructions Status Indicator MPI • green • red Color Reset battery ok battery low Blink pattern • slow power on no communications • heartbeat power on communications ok QuickSet II Programmer LT2000 LT2002 ZENITH ELECTRONICS CORPORATION, GLENVIEW, ILLINOIS, USA LT2002 Clone Programmer QuickSet II Programmer LT2000 LT2002 ZENITH ELECTRONICS CORPORATION, GLENVIEW, ILLINOIS, USA LT2002 Clone Programmer The optional QuickSet II Clone Programmer LT2002 allows custom setup and programming information to be quickly copied from a master TV into multiple identical television sets. Once learned from the master, setup data is retained in the clone programmer for future use. When using the LT2002, cloning operations will go easier if the TV set is connected to a good quality analog signal and operating with a stable picture displayed. To operate the LT2002, use the indicated keys on a HealthView Installer's remote or the remote shown on page 16. Notes: Do not run Auto Program while cloning. Page 52 206-4065