LG H20J55DT Owner's Manual - Page 48

Installer Menu Detailed Descriptions for Installer Menu Items 28-I through 56-I 28-I. CH. OVER RIDE (Channel Override) If set to 1, the user can select channels with either Channel Up/Down or by direct keypad entry. If set to 0, only those channels that are entered for scanning may be selected by direct keypad entry. Note: If set to 0, Auto Program is locked out; (as shown on Setup menu) channel search is not available. 29-I. OLD OCV (On Command VideoTM) Set to 1 for operation with systems from On Command Corporation. 30-I. ACK MASK M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider. 31-I. POLL RATE M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider. 32-I. TIMING PULSE M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider. 33-I. NOT USED 34-I. NOT USED 35-I. NOT USED 36-I. NOT USED 37-I. NOT USED 38-I. NOT USED 39-I. REAR VIDEO EN. (Rear Video Enable) Set to 1 to enable rear AUX (Video) input. Set to 0 to disable rear AUX input. 40-I. NOT USED 41-I. NOT USED 42-I. NOT USED 43-I. NOT USED 44-I. NOT USED 45-I. NOT USED 46-I. NOT USED 47-I. AUX STATUS Set to 1 for M.P.I. AUX source to be reported as a channel number instead of channel 0. Set to 0 to disable AUX identification change. 48-I. DIS SETUP M (Disable Setup Menu) Set to 1 to disable the Setup menu. Setup menu will not appear. Set to 0 to enable the Setup menu. 49-I. NOT USED 50-I. DIS VIDEO M (Disable Video Menu) Set to 1 to disable the Video menu. Video menu will not appear. Set to 0 to enable the Video menu. 51-I. DIS VCHIP M (Disable V-Chip Menu) Set to 1 to disable V-Chip menu. V-Chip menu will not appear. Set to 0 to enable the V-Chip menu. 52-I. NOT USED 53-I. DIS CH-TIME (Disable Channel-Time OSD) Set to 1 to disable the Channel-Time display. Channel-Time display will not appear. Set to 0 to enable the Channel-Time display. 54-I. EN SET COL (Enable Setup Menu Color) Set to 1 to enable custom color settings for the Setup menu. Set to 0 to disable custom color settings for the Setup menu. 55-I. FOR SETUP M (Setup Menu Foreground Color) Set according to Color Chart. 0 = Black 3 = Yellow 6 = Cyan 1 = Red 4 = Blue 7 = White 2 = Green 5 = Violet 56-I. BCK SETUP M (Setup Menu Background Color) Set according to Color Chart. 0 = Black 3 = Yellow 6 = Cyan 1 = Red 4 = Blue 7 = White 2 = Green 5 = Violet 57-I. NOT USED 58-I. NOT USED 59-I. NOT USED Page 48 206-4065