LG H20J55DT Owner's Manual - Page 54

LT2002 QuickSet Programmer Cloning THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION XX THE TV IS VERSION XX THE SW IS REVISION XX CLONE CLOCK = XX:XX TV CLOCK = XX:XX - PRESS ANY KEY TO CONTINUE. - DISCONNECT CLONE WHEN DONE. CLONE SELECTION MENU (1) LEARN FROM TV (2) TEACH TO TV (3) SET CLONE CLOCK FROM TV (4) SET TV CLOCK FROM CLONE (5) DISPLAY TV SETUP (6) DISPLAY CLONE SETUP -TO CHANGE MENU ITEMS, PRESS CHANNEL KEYS OR DIGITS. -TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER C. Learn Setup from Master TV Since the Clone Programmer's time can- Press 1 to select the "Learn From TV" not be set directly, the time needs to option, then press ON/OFF, POWER, or be copied from a Zenith TV equipped ENTER to go to the Memory Bank with M.P.I. Input capability. Selection Menu. Pick the Memory Once the time is copied to the Clone "Bank" you want to store this Master programmer, the current time can then TV's Setup in by pressing either Channel be transferred to another TV. (This can key repeatedly to pick Memory 1, 2 or be a Master TV, or another TV which 3. (If you choose a Memory "Bank" that has had the features already set up.) already has a master TV's setup in it, it will be overwritten by this Master TV's D. Teach Master TV's Setup to Another setup.) Identical TV After Learning is complete, remove the Once the Clone memory bank is select- M.P.I. cable from the master TV and ed, press ON/OFF, POWER or ENTER. The connect it to the TV that you want to Clone memory bank you have selected copy the master TV's setup to. With the will be shown. Press ON/OFF or POWER "TV is Controlled by Clone" message to begin copying the master TV's setup. displayed, press 2 or use either Channel Ca. Set the Clock (Optional) key to go to the "Teach to TV" option, Set the time on the Master TV's Clock. press ON/OFF, POWER or ENTER. (If the time has already been copied from another TV into the Clone programmer, you can set the Master TV's clock by copying the time from the Clone programmer.) The LT2000 Clone Programmer can copy the current time to both a master TV and to the Clone's internal clock; accurate to within one minute. (Another reason that the Clone programmer should be equipped with fresh, high-quality alkaline batteries is for it to keep the time as accurately as possible.) Follow on-screen instructions to transfer the Setup and other information to the "Learning" TV. After the "Teach to TV is Complete" message is displayed, press any key to return to the Clone menus option, then press ON/OFF, POWER or ENTER. If finished, remove the M.P.I. Cable from the TV. E. Disconnect TV Power for 15 Seconds Unplug the TV power cord of the newly "Cloned TV" from the power outlet for about 15 seconds to activate the newly-copied Setup. Page 54 206-4065