LG LFX28968SW Service Manual - Page 17

Water Valve Disassembly Method, Fan And Fan Motor Disassembly, Method

Get LG LFX28968SW PDF manuals and user guides View all LG LFX28968SW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

3-21 WATER VALVE DISASSEMBLY METHOD 1) Turn off the water to unit. Remove the waterline from the valve. 3-22 FAN AND FAN MOTOR DISASSEMBLY METHOD 1) Remove screws for the Drain Pipe Assembly and the 1 connected to the Motor Cover. MOTOR COVER 2) Remove cover and 1 screw from the valve. Mechanical Cover Figure 60 Figure 64 2) Separate the Fan Assembly and Motor, turn counter clockwise to remove from the motor shaft. FAN ASSEMBLY MOTOR Figure 61 3) Separate the housing and remove the valve. Housing Figure 65 Assemble in reverse order. Taking care to avoid. 1. Do not to bend the tube during assembly. 2. Press the Water Dispenser button letting water pour out, this checks for any leaks in the tube connection, this may vary depending on the water pressure ( about 2 minutes.). Figure 62 4) Remove the clip, and press the collet to separate the tube from the connector. Note: there maybe some water in the line. Figure 63 - 17 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
- 17 -
3-21
WATER VALVE DISASSEMBLY METHOD
1) Turn off the water to unit. Remove the waterline from the
valve.
3-22
FAN AND FAN MOTOR DISASSEMBLY
METHOD
1) Remove screws for the Drain Pipe Assembly and the 1
connected to the Motor Cover.
2) Remove cover and 1 screw from the valve.
3) Separate the housing and remove the valve.
4) Remove the clip, and press the collet to separate the
tube from the connector. Note: there maybe some water
in the line.
Mechanical Cover
Housing
MOTOR COVER
2) Separate the Fan Assembly and Motor, turn counter
clockwise to remove from the motor shaft.
FAN ASSEMBLY
MOTOR
Assemble in reverse order. Taking care to avoid.
1.
Do not to bend the tube during assembly.
2.
Press the Water Dispenser button letting water pour out,
this checks for any leaks in the tube connection, this may
vary depending on the water pressure
( about 2 minutes.).
Figure 60
Figure 61
Figure 62
Figure 63
Figure 64
Figure 65