LG LFX28968SW Service Manual - Page 5

Disassembly

Get LG LFX28968SW PDF manuals and user guides View all LG LFX28968SW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

3. DISASSEMBLY 3-1 REMOVING AND REPLACING REFRIGERATOR DOORS ● Removing Refrigerator Door CAUTION: Before you begin, unplug the refrigerator. Remove food and bins from doors. ▶ Left Door -FIG. 2 1. Disconnect water supply tube by pushing back on the disconnect ring (3).-FIG. 1 2. Open door. Loosen top hinge cover screw (1). Use flat tip screwdriver to pry back hooks on front underside of cover (2). Lift up cover. 3. Disconnect door switch wire harness and remove the cover. 4. Pull out the tube. 5. Disconnect all 3 wiring harnesses (4). Remove the grounding screw (5). 6. Rotate hinge lever (6) counterclockwise. Lift top hinge (7) free of hinge lever latch (8). CAUTION: When lifting hinge free from the latch, be careful that door does not fall forward. 7. Lift door from middle hinge pin and remove door. 8. Place the door with the insides facing up, on a not scratch surface. ▶ Right Door -FIG. 3 1. Open the door, remove 1 screw on the top of the hinge cover. Loosen top hinge cover screw (1). Lift up cover (2). 2. Disconnect door switch wire harness and remove the cover. 3. Rotate hinge lever (3) clockwise. Lift top hinge (4) free of hinge lever latch (5). 4. Lift door from middle hinge pin and remove door. CAUTION: When lifting hinge free from the latch, be careful that the door does not fall forward. 5. Place the door with the insides facing up, on a not scratch surface. Figure 2    Figure 3 ! # $ % &    " ! " # Figure 1 - 5- 1) Insert the tube until you can see only one of the lines printed on the tube. 2) After inserting, pull the tube to ascertain that it is secure. 3) Assemble clip. Correct Incorrect

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
- 5 -
3. DISASSEMBLY
3-1
REMOVING AND REPLACING REFRIGERATOR DOORS
●
Removing Refrigerator Door
CAUTION:
Before you begin, unplug the refrigerator. Remove food and bins from doors.
▶
Left Door -FIG. 2
1. Disconnect water supply tube by pushing back on the disconnect ring (3).-FIG. 1
2. Open door. Loosen top hinge cover screw (1).
Use flat tip screwdriver to pry back hooks on front underside of cover (2). Lift up cover.
3. Disconnect door switch wire harness and remove the cover.
4. Pull out the tube.
5. Disconnect all 3 wiring harnesses (4). Remove the grounding screw (5).
6. Rotate hinge lever (6) counterclockwise. Lift top hinge (7) free of hinge lever latch (8).
7.
Lift door from middle hinge pin and remove door.
8.
Place the door with the insides facing up, on a not scratch surface.
CAUTION:
When lifting hinge free from the latch, be careful that door does not fall forward.
▶
Right Door -FIG. 3
1. Open the door, remove 1 screw on the top of the hinge cover. Loosen top hinge cover screw (1). Lift up cover (2).
2. Disconnect door switch wire harness and remove the cover.
3. Rotate hinge lever (3) clockwise. Lift top hinge (4) free of hinge lever latch (5).
4. Lift door from middle hinge pin and remove door.
5. Place the door with the insides facing up, on a not scratch surface.
CAUTION:
When lifting hinge free from the latch, be careful that the door does not fall forward.
Figure 2
Figure 3
Figure 1
1) Insert the tube until you can see only one of
the lines printed on the tube.
2) After inserting, pull the tube to ascertain that
it is secure.
3) Assemble clip.