LG LSEL6331F Owners Manual - Page 11
Tools Needed, Parts, Parts Provided, Unpacking and Moving the Range
View all LG LSEL6331F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Tools Needed a Phillips screwdriver b Flat-blade screwdriver c 1/4" Nut driver d Pliers e Tape measure f Level g Adjustable wrench h Drill i Safety glasses j Gloves Parts Parts Provided a Template (1) b Anti-tip bracket kit (1) c Anchor sleeves (4) d Lag bolts (4) Parts Not Provided INSTALLATION 11 a 4-Wire cord or 3-Wire cord (UL approved 40 or 50 AMP) b Strain relief (For conduit installations only) NOTE • Observe all governing codes and ordinances. • Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference. • As when using any appliance generating heat, there are certain safety precautions you should follow. • Be sure your range is installed and grounded properly by a qualified installer or service technician. Unpacking and Moving the Range WARNING • You should use two or more people to move and install the range. (Excessive Weight Hazard) Failure to do so can result in back or other injury. • Do not use the door handles to push or pull the range during installation or when moving the range out for cleaning or service. Doing so can result in serious damage to the door of the range. • To reduce the risk of burns, do not move this appliance while it is hot. NOTE • Remove packing material, tape and any temporary labels from your range before using. Do not remove any warning-type labels, the model and serial number label, or the Tech Sheet that is located on the back of the range. • To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry. ENGLISH