LG LSEL6331F Owners Manual - Page 27
Setting Convection Auto Conversion, Model LSEL6333, Adjusting the Oven Thermostat
View all LG LSEL6331F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Setting Convection Auto Conversion (Model LSEL6333*) When Conv. Bake and Conv. Roast are selected, Convection Auto Conversion automatically converts the standard recipe temperature entered to a convection temperature by subtracting 25 °F / 14 °C. This auto converted temperature shows on the display. For example, select Conv. Bake, enter 350 °F, and 325 °F shows on the display after preheat. Convection Auto Conversion is enabled by default. To change the setting, follow these instructions. 1 Set the oven mode knob to the Off position. 2 Press and hold Start Time for 3 seconds. Then press the Start Time key repeatedly until Auto appears in the display. 3 Press plus(+) or minus(-) to enable or disable the feature. 4 Press START to accept the change. Adjusting the Oven Thermostat Your new oven may cook differently from the one it replaced. Use your new oven for a few weeks to become more familiar with it before changing the temperature settings. If after familiarizing yourself with the new oven, you still think that it is too hot or too cold, you can adjust the oven thermostat yourself. • To begin, either raise or lower the thermostat 15 °F (8 °C). Try the oven with the new setting. If the oven still needs adjustment, raise or lower the thermostat again, using the first adjustment as a gauge. For example, if the adjustment was too much, raise or lower the thermostat 10 °F (5 °C). If the adjustment was not enough, raise or lower the thermostat 20 °F (12 °C). Proceed in this way until the oven is adjusted to your satisfaction. Model LSEL6333* 1 Set the oven mode knob to the Off position. Press and hold Start Time for 3 seconds. Then press Start Time repeatedly until AdJU appears in the display. 2 Set the number of degrees to adjust: Press or press and hold the +/- buttons until the desired number of degrees appears in the display. 3 Press START to accept the change. OPERATION 27 Model LSEL6331* 1 Press and hold Clock for 3 seconds. Then press Clock repeatedly until AdJU appears in the display. 2 Set the number of degrees to adjust: Press or press and hold the +/- buttons until the desired number of degrees appears in the display. 3 Press START to accept the change. NOTE • This adjustment does not affect the broiling or Self Clean temperatures. The adjustment is retained in memory after a power failure. The oven temperature can be increased (+) or decreased (-) as much as 35 °F or 19 °C. • Once the temperature is increased or decreased, the display shows the adjusted temperature until it readjusts. Turning the Preheat Alarm Light On/Off When the oven reaches its set-temperature, the preheating alarm light flashes 5 times or until the oven door is opened. You can activate or deactivate the preheating alarm light. Model LSEL6333* 1 Set the oven mode knob to the Off position. Press and hold Start Time for 3 seconds. Then press Start Time repeatedly until PrE appears in the display. 2 Press +/- to turn the light on/off. 3 Press START to accept the change. Model LSEL6331* 1 Press and hold Clock for 3 seconds. Then press Clock repeatedly until PrE appears in the display. 2 Press +/- to turn the light on/off. 3 Press START to accept the change. Adjusting the Beeper Volume Model LSEL6333* ENGLISH