LG LSEL6331F Owners Manual - Page 16

16 INSTALLATION Specified Power Cord Kit Rating Case 1 • Voltage: 120/240 volts (3-wire) • Range rating: 8,750 W - 16,500 W • Specified rating of power supply-cord kit, amperes: 40 A or 50 A • Diameter (inches) of range connection opening - Power cord: 1 3/8" - Conduit: 1 1/8" Case 2 • Voltage: 120/240 volts (3-wire) • Range rating: 16,501 W - 22,500 W • Specified rating of power supply-cord kit, amperes: 50 A • Diameter (inches) of range connection opening - Power cord: 1 3/4" - Conduit: 1 3/8" Case 3 • Voltage: 120/208 volts (3-wire) • Range rating: 7,801 W- 12,500 W • Specified rating of power supply-cord kit, amperes: 40 A or 50 A • Diameter (inches) of range connection opening - Power cord: 1 3/8" - Conduit: 1 1/8" Case 4 • Voltage: 120/208 volts (3-wire) • Range rating: 12,501 W - 18,500 W • Specified rating of power supply-cord kit, amperes: 50 A • Diameter (inches) of range connection opening - Power cord: 1 3/4" - Conduit: 1 3/8" 3, 4 - Wire Electrical Wall Receptacle 4 Wire receptacle (14-50R) Connecting the Power Cord / Conduit The rear access cover a must be removed. Loosen the two screws with a screwdriver. The terminal block will then be accessible. Use the cord/conduit connection plate b to install the power cord or conduit. Leave the connection plate as installed for power cord installations. Remove the connection plate for conduit installations and use the smaller 1 1/8 in. (2.8 cm) conduit hole c instead of the 1 3/8 in. (3.5 cm) power cord hole d. 11/8" (2.8 cm) 13/8" (3.5 cm) For power cord e installations, hook the strain relief over the 1 3/8 in. (3.5 cm) power cord hole located below the rear of the oven. Insert the power cord through the strain relief and tighten it. For conduit installations, insert the conduit strain relief in the 1 1/8 in. (2.8 cm) conduit hole. Then install the conduit through the body of the strain relief and fasten the strain relief with its ring. 3 Wire receptacle (10-50R)