LG LSEL6331F Owners Manual - Page 17

-Wire Connection: Power Cord, WARNING, CAUTION

Get LG LSEL6331F PDF manuals and user guides View all LG LSEL6331F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

f Ring g Body h Cord/Conduit connection plate i Conduit 3-Wire Connection: Power Cord WARNING • The middle (neutral or ground) wire, which is white, of a 3-wire power cord or a 3-wire conduit has to be connected to the middle post of the main terminal block. The remaining two wires of the power cord or conduit have to be connected to the outside posts of the main terminal connection block. Failure to do so can result in electrical shock, severe personal injury or death. • If screws are not tightened securely, it can result in electrical spark and severe personal injury or death. 1 For power cord installations, hook the strain relief over the power cord hole (1 3/8") located below the rear of the oven. 2 Insert the power cord through the strain relief and tighten it. CAUTION • Do not install the power cord without a strain relief. 3 Remove the lower 3 screws from the terminal block and retain them. 4 Insert the 3 screws through each power cord terminal ring and into the lower terminals of the terminal block. • Make sure that the center (neutral) wire, which is white, is connected to the center lower position of the terminal block. INSTALLATION 17 5 Tighten the 3 screws securely into the terminal block. CAUTION • Do not remove the ground strap connections. a Black b White c Red d Terminal block e Cord/Conduit connection plate 4-Wire Connection: Power Cord WARNING • Only a 4-conductor power-supply cord kit rated 120/240 volts, 50 amperes and marked for use with ranges with closedloop connectors or opened spade lugs with upturned ends shall be used. The white middle (neutral) wire of the power cord or 4-wire conduit has to be connected to the middle post of the main terminal block. The other two wires of the power cord or conduit have to be connected to the outside posts of the main terminal connection block. The 4th ground wire (green) must be connected to the frame of the range with the ground screw. Failure to do so can result in electrical shock, severe personal injury or death. • If screws are not tightened securely, it can result in electrical spark and severe personal injury or death. 1 For power cord installations, hook the strain relief over the power cord hole (1 3/8") located below the rear of the oven. ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
17
INSTALLATION
ENGLISH
f
Ring
g
Body
h
Cord/Conduit connection plate
i
Conduit
3-Wire Connection: Power Cord
WARNING
•
The middle (neutral or ground) wire, which is
white, of a 3-wire power cord or a 3-wire conduit
has to be connected to the middle post of the
main terminal block. The remaining two wires of
the power cord or conduit have to be connected
to the outside posts of the main terminal
connection block. Failure to do so can result in
electrical shock, severe personal injury or death.
•
If screws are not tightened securely, it can result
in electrical spark and severe personal injury or
death.
1
For power cord installations, hook the strain
relief over the power cord hole (1 3/8") located
below the rear of the oven.
2
Insert the power cord through the strain relief
and tighten it.
CAUTION
•
Do not install the power cord without a strain
relief.
3
Remove the lower 3 screws from the terminal
block and retain them.
4
Insert the 3 screws through each power cord
terminal ring and into the lower terminals of
the terminal block.
•
Make sure that the center (neutral) wire,
which is white, is connected to the center
lower position of the terminal block.
5
Tighten the 3 screws securely into the
terminal block.
CAUTION
•
Do not remove the ground strap connections.
a
Black
b
White
c
Red
d
Terminal block
e
Cord/Conduit connection plate
4-Wire Connection: Power Cord
WARNING
•
Only a 4-conductor power-supply cord kit rated
120/240 volts, 50 amperes and marked for use
with ranges with closedloop connectors or
opened spade lugs with upturned ends shall be
used. The white middle (neutral) wire of the
power cord or 4-wire conduit has to be
connected to the middle post of the main
terminal block. The other two wires of the power
cord or conduit have to be connected to the
outside posts of the main terminal connection
block. The 4th ground wire (green) must be
connected to the frame of the range with the
ground screw. Failure to do so can result in
electrical shock, severe personal injury or death.
•
If screws are not tightened securely, it can result
in electrical spark and severe personal injury or
death.
1
For power cord installations, hook the strain
relief over the power cord hole (1 3/8") located
below the rear of the oven.