Lexmark 21Z0294 User Guide - Page 121

Understanding printer messages 121 Waiting The printer has received data to print, but is waiting for an End‑of‑Job command, a Form Feed command, or additional data. • Press to print the contents of the buffer. • Cancel the current print job. 31 Missing or defective cartridge The specified toner cartridge is either missing or not functioning properly. • Remove the specified toner cartridge, and then reinstall it. Note: To learn how to install a toner cartridge, press repeatedly until Show Me appears, and then press . • Remove the specified toner cartridge, and then install a new one. 32 Replace unsupported cartridge Remove the specified toner cartridge, and then install a supported one. Note: To learn how to install a toner cartridge, press repeatedly until Show Me appears, and then press . 34 Incorrect paper type, check • Load the appropriate paper or other specialty media in the proper tray. • Check tray length and width guides and make sure the paper is properly loaded in the tray. • Check the Print Properties settings to make sure the print job is requesting the correct paper size and type. • Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed. • Cancel the current print job. 34 Incorrect paper size, check • Load the appropriate paper or other specialty media in the proper tray. • Press until Continue appears, and then press paper tray. to clear the message and print the job using a different • Check tray length and width guides and make sure the paper is properly loaded in the tray. • Check the Print Properties settings to make sure the print job is requesting the correct paper size and type. • Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed. • Cancel the current print job.