Lexmark 21Z0294 User Guide - Page 55

Printing 55 3 Click the trash icon. Canceling a print job from Mac OS X 1 Choose Applications > Utilities, and then double‑click Print Center or Printer Setup Utility. 2 Double‑click the printer you are printing to. 3 From the printer window, select the job to cancel. 4 From the icon bar at the top of the window, click the Delete icon. Printing in black and white To print all text and graphics using only the black toner cartridge, set the printer to Black Only. Note: The printer driver is capable of overriding this setting. 1 From the control panel, press . 2 Press repeatedly until Settings appears, and then press . 3 Press repeatedly until Quality Menu appears, and then press . 4 Press repeatedly until Print Mode appears, and then press . 5 Press repeatedly until Black Only appears, and then press . Submitting selection appears. Using Max Speed and Max Yield The Max Speed and Max Yield settings allow you to choose between a faster print speed or a higher toner yield. Max Speed is the factory default setting. • Max Speed-Prints in a black only mode until it receives a page with color content. Then, it prints in color and does not switch to black only until it receives ten consecutive black‑and‑white pages. • Max Yield-Switches from black to color mode based on the color content found on each page. Frequent color mode switching can result in slower printing if the content of pages is mixed. To specify the setting: 1 Open a Web browser. 2 In the address bar, type the network printer or print server IP address, and then press Enter. 3 Click Configuration. 4 Click Print Settings. 5 Click Setup Menu. 6 From the Printer Usage list, select Max Speed or Max Yield. 7 Click Submit.