Lexmark C510 User's Reference - Page 115
Setup Guide, If you need to install another optional firmware or flash memory card on the system board
View all Lexmark C510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Administration 3 Holding the card by its sides, gently pull it straight out from the system board. If the card does not come out easily, turn the top edge of the card away slightly and then toward the system board several times as you pull gently and evenly on both sides. Note: Avoid touching the metal pins on the bottom of the card. 4 Place the optional firmware or flash memory card in its original packaging, or wrap it in paper and store it in a box for protection. 5 If you need to install another optional firmware or flash memory card on the system board, refer to the Setup Guide. 6 Replace the system board. See Replacing the system board. Removing optional cards 115
Removing optional cards
115
Administration
3
Holding the card by its sides, gently pull it straight out from the system board. If the card does
not come out easily, turn the top edge of the card away slightly and then toward the system
board several times as you pull gently and evenly on both sides.
Note:
Avoid touching the metal pins on the bottom of the card.
4
Place the optional firmware or flash memory card in its original packaging, or wrap it in paper
and store it in a box for protection.
5
If you need to install another optional firmware or flash memory card on the system board,
refer to the
Setup Guide
.
6
Replace the system board. See
Replacing the system board
.