Lexmark C510 User's Reference - Page 97

Administration Adjusting Power Saver To adjust the Power Saver setting in the Setup Menu: 1 Press Menu until you see Setup Menu, and then press Select. 2 Press Menu until you see Power Saver, and then press Select. 3 Press Menu until you see the desired number of minutes and then press Select. Minute settings available range from 1-240. If needed, the menu value Disabled is also available. Note: You can also adjust the Power Saver setting by issuing a Printer Job Language (PJL) command. For more information, refer to the Technical Reference available on our Lexmark Web site at www.lexmark.com. Configuring printer alerts You can configure the printer several ways to let you know when it requires attention. Using the Setup Menu Menu item Function Value Result Alarm Control Lets you establish whether the printer sounds an alarm when it requires operator intervention. Off Single Continuous The alarm does not sound, but printing stops until the interventions are cleared.* The printer stops printing, displays a message, and activates the selected alarm type. Toner Alarm Lets you choose how the Off printer responds when toner is low. Single Continuous The printer displays a message and continues printing. The printer stops printing, displays a message, and activates the selected alarm type. * If multiple attendance conditions are pending, the alarm only sounds when the first message is displayed. No additional alarms sound as subsequent attendance conditions arise. Selecting Auto Continue may affect how the printer alerts execute. This setting defines how long the printer waits after displaying a message before it resumes printing. Adjusting Power Saver 97