Lexmark C510 User's Reference - Page 166
Supplies Menu, Timeout, <color>, Toner, Waste, Bottle, Photodev, Fuser - waste bottle full
View all Lexmark C510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Using printer menus Menu Item Wait Timeout Purpose Values To specify the amount of time (in seconds) the printer waits to receive additional bytes of data from the computer. When this timeout expires, the print job is canceled. Disabled 15...65535 (40*) Wait Timeout is only available when you use PostScript emulation. This menu item has no effect on PCL emulation print jobs. Disables Wait Timeout. Specifies the amount of time the printer waits for additional data before it cancels the job. Supplies Menu The Supplies Menu provides information about printer supplies that require attention. It is only available when a supply is low or needs replacement. Menu Item Toner Waste Bottle Photodev Cart Fuser Purpose Values To view the status of the color toner cartridges where represents yellow, magenta, cyan, or black. Low To view the status of the toner waste bottle. Note: Once the toner waste bottle reaches Full, the printer will print up to 15 more pages from the buffer and then stop until the bottle is replaced. Near Full Full or Missing The toner waste bottle is nearly full. The toner waste bottle is full or is missing from the printer. To view the status of the photodeveloper cartridge. Life Warning The photodeveloper cartridge is close to reaching its end of use. Exhausted The photodeveloper cartridge is completely used. To view the status of the fuser. This menu item is shown in the Supplies Menu when the supply is not within life warning or exhausted state. Life Warning Exhausted The fuser is close to reaching its end of use. The fuser is completely used. Supplies Menu 166