Lexmark CS417 User Guide - Page 146
Complex some data may not have printed [39], Configuration change
View all Lexmark CS417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Troubleshooting 146 Complex page, some data may not have printed [39] Try one or more of the following: • From the printer control panel, select Continue to ignore the message and continue printing. For non‑touch‑screen printer models, press to confirm. • Cancel the current print job. For non‑touch‑screen printer models, press • Install additional printer memory. to confirm. Configuration change, some held jobs were not restored [57] Held jobs are invalidated because of any of the following possible changes in the printer: • The printer firmware has been updated. • The tray for the print job is removed. • The print job is sent from a flash drive that is no longer attached to the USB port. • The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer model. From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm. Defective flash detected [51] Try one or more of the following: • Replace the defective flash memory card. • From the printer control panel, select Continue to ignore the message and continue printing. For non‑touch‑screen printer models, press • Cancel the current print job. to confirm. Error reading USB drive. Remove USB. An unsupported USB device is inserted. Remove the USB device, and then insert a supported one. Error reading USB hub. Remove hub. An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one. Incompatible tray [x] [59] Remove, and then reinstall the indicated tray to clear the message.