Lexmark CS417 User Guide - Page 73
IPv6 menu, Network/Ports menu, Standard Network, Network [x], Network [x] Setup
View all Lexmark CS417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Understanding the printer menus 73 Use To Enable DHCP On Off Specify the DHCP address and parameter assignment. Note: On is the factory default setting. Enable RARP On Off Specify the RARP address assignment setting. Note: Off is the factory default setting. Enable BOOTP On Off Specify the BOOTP address assignment setting. Note: On is the factory default setting. Enable AutoIP Yes No Specify the Zero Configuration Networking setting. Note: Yes is the factory default setting. Enable FTP/TFTP Yes No Send files to the printer using the built‑in FTP server. Note: Yes is the factory default setting. Enable HTTP Server Yes No Enable the built-in Web server (Embedded Web Server) which lets you monitor and manage the printer remotely using a Web browser. Note: Yes is the factory default setting. WINS Server Address View or change the current WINS server address. Enable DDNS Yes No View or change the current DDNS setting. Note: Yes is the factory default setting. Enable mDNS Yes No View or change the current mDNS setting. Note: Yes is the factory default setting. DNS Server Address View or change the current DNS server address. Backup DNS Server Address [x] View or change the current DNS server address. Enable HTTPS Yes No View or change the current HTTPS setting. Note: Yes is the factory default setting. IPv6 menu To access the menu, navigate to any of the following: • Network/Ports menu > Standard Network > Standard Network Setup > IPv6 • Network/Ports menu > Network [x] > Network [x] Setup > IPv6 Note: This menu is available only in network printers or printers that are attached to print servers.