Lexmark CS417 User Guide - Page 72
Network Card menu, TCP/IP menu, Network/Ports, Standard Network, Network [x], Network [x] Setup
View all Lexmark CS417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Understanding the printer menus 72 Network Card menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Network Card • Network/Ports > Network [x] > Network [x] Setup > Network Card Use To View Card Status Connected Disconnected View the connection status of the wireless network adapter. View Card Speed View the speed of an active wireless network adapter. Energy Efficient Ethernet Enable Disable Reduce power consumption when the printer receives no data from the Ethernet network. Note: Enable is the factory default setting. Network Address UAA LAA View the network addresses. Job Timeout 0, 10-225 seconds Set the amount of time it takes for a network print job to be canceled. Notes: • 90 seconds is the factory default setting. • A setting value of 0 disables the timeout. • A value between 1 and 9 is invalid. Banner Page Off On Allow the printer to print a banner page. Note: Off is the factory default setting. TCP/IP menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > TCP/IP • Network/Ports > Network [x] > Network [x] Setup > TCP/IP Note: This menu is available only in network printers or printers that are attached to print servers. Use Set Hostname IP Address Netmask Gateway To Set the current TCP/IP hostname. View or change the current TCP/IP address. Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP. View or change the current TCP/IP netmask. View or change the current TCP/IP gateway.