Lexmark CS417 User Guide - Page 84
Show Bookmarks, Web Refresh Rate, Contact Name, Location, Alarms, Notes, Timeouts
View all Lexmark CS417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Understanding the printer menus Use Show Bookmarks Yes No Web Page Refresh Rate 30-300 Contact Name Location Alarms Alarm Control Cartridge Alarm Timeouts Standby Mode Disabled 1-240 Timeouts Sleep Mode Disabled 1-120 Timeouts Print with Display Off Allow printing with display off Display on when printing 84 To Specify whether bookmarks are displayed from the Held Jobs area. Note: Yes is the factory default setting. Specify the number of seconds between Embedded Web Server refreshes. Note: 120 is the factory default setting. Specify a contact name. Note: The contact name is stored on the Embedded Web Server. Specify the location. Note: The location is stored on the Embedded Web Server. Set an alarm when the printer requires user intervention. For each alarm type, select from the following options: Off Single Continuous Notes: • Single is the factory default setting. This sounds three quick beeps. • Continuous repeats three beeps every 10 seconds. Set the amount of time in minutes before the printer enters a lower power state. Note: 15 is the factory default setting. Set the amount of time in minutes the printer waits after a job is printed before it goes into a reduced power state. Notes: • 20 is the factory default setting. • Lower settings conserve more energy, but may require longer warm‑up times. • Select the lowest setting if the printer shares an electrical circuit with room lighting or you notice lights flickering in the room. • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm‑up time. • Disabled appears only if Energy Conserve is set to Off. Print a job with the display turned off. Note: Display on when printing is the factory default setting.