Lexmark E232 User's Guide - Page 45
How to add a memory card, Align the notches on the bottom of the card - driver 8 1
View all Lexmark E232 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
How to add a memory card The system board has one connector for an optional memory card. The printer can support up to 64MB of additional memory (for a total of 80MB) for the Lexmark E232 and up to 128MB (for a total of 160MB) for the Lexmark E330 and Lexmark E332n. The Lexmark E230 does not support additional memory. CAUTION: If you are installing a memory card after setting up the printer, turn the printer off and unplug the power cord before continuing. Note: Memory options designed for other Lexmark printers may not work with your printer. 1 Access the system board (see How to access the system board). 2 Push open the latches on both ends of the memory connector. 3 Unpack the memory card. Warning: Memory and flash memory cards are easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch a memory card. Avoid touching the connection points along the edge of the card. 4 Align the notches on the bottom of the card with the notches on the connector. 5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place. It may require some force to fully seat the card. 6 Make sure each latch fits over the notch on each end of the card. 7 Reattach the system board cover (see How to reattach the system board cover). 8 See How to get the printer driver to recognize installed options. How to install options 45