Lexmark M410 Service Manual - Page 52
Input Trays Option Service Check, Sheet Input Tray Option
UPC - 734646261005
View all Lexmark M410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
4045-XXX Service Tip: Run the Sensor Monitor Test in the Hardware Test Mode with the controller board removed. FRU 1 Input Sensor Flag 2 Engine Board 3 Input Sensor Cable Action Check the input sensor flag for damage and proper operation. If a problem is found, repair as necessary. Check for approximately +5 V dc at J2-3 on the engine board. If incorrect, replace the engine board. Check the continuity of the input sensor cable. If incorrect, replace the cable. If correct, replace the input sensor assembly. Input Tray(s) Option Service Check 500-Sheet Input Tray Option Service Tip: Try all the other input paper sources to make sure they are properly feeding paper. Run the Tray 2 Motor Test in the Hardware Test Mode to verify motor and related paper feed components are working properly. With the motor on, actuate the tray 2 solenoid from the Solenoid Test to feed paper. 2-26 Service Manual