Lexmark M410 Service Manual - Page 62
Printhead Service Check, Service Manual
UPC - 734646261005
View all Lexmark M410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4045-XXX Printhead Service Check The printhead assembly does not contain any service replaceable parts or components. Service Error Code 1 Error Code 931 No first HYSNC Signal Error Code 932 Lost HYSNC 2 Error Code 935 Mirror Motor unable to reach operating speed Explanation These errors usually indicate a failure in the HYSNC signal to the printhead. Check the continuity of the cable connected to J5 on the engine board. If incorrect, replace the defective cable. The voltage at J5-6 measures approximately +5 V dc. If incorrect, replace the engine board. If correct, replace the printhead assembly. These error codes indicate a problem with the mirror motor circuit in the printhead assembly or the mirror motor cable to the engine board cable or engine board assembly. Check the continuity of the mirror motor cable connected to J8 on the engine board. If incorrect, replace the cable. The voltage at J8-5 measures approximately +24 V dc. If incorrect, replace the engine board. If correct, replace the FRUs in the following order: printhead assembly engine board 2-36 Service Manual