Lexmark MS818 Users Guide PDF - Page 122
Printing a menu settings Printing a network setup
View all Lexmark MS818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Using MS810de 122 5 Type the IP addresses of the source and target printers. Note: If you want to add or remove target printers, then click Add Target IP or Remove Target IP. 6 Click Copy Printer Settings. Printing a menu settings page From the home screen, navigate to: > Reports > Menu Settings Page Printing a network setup page If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration. 1 From the home screen, navigate to: > Reports > Network Setup Page 2 Check the first section of the network setup page and confirm that the status is Connected. If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult your system support person for a solution, and then print another network setup page. Checking the status of parts and supplies Notes: • Each gauge shows the estimated life left for the supply or part. • All page life estimates for supplies assume printing on a single side of a letter‑ or A4‑size plain paper. Checking the status of parts and supplies on the printer control panel From the home screen, touch Status/Supplies > View Supplies. Checking the status of parts and supplies from the Embedded Web Server Note: Make sure the computer and the printer are connected to the same network. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Device Status > More Details.