Lexmark MS818 Users Guide PDF - Page 234

Understanding the printer menus 234 Use To Blank Pages Do Not Print Print Specify whether blank pages are inserted in a print job. Note: Do Not Print is the factory default setting. Collate (1,1,1) (2,2,2) (1,2,3) (1,2,3) Stack the pages of a print job in sequence when printing multiple copies. Note: "(1,1,1) (2,2,2)" is the factory default setting. Separator Sheets Off Between Copies Between Jobs Between Pages Specify whether blank separator sheets are inserted. Notes: • Off is the factory default setting. • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to "(1,2,3) (1,2,3)." If Collate is set to "(1,1,1) (2,2,2)," then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's. • Between Jobs inserts a blank sheet between print jobs. • Between Pages inserts a blank sheet between each page of a print job. This setting is useful when printing transparencies or when inserting blank pages in a document. Separator Source Tray [x] Multipurpose Feeder1 MP Feeder2 Specify the paper source for the separator sheet. Notes: • Tray 1 (standard tray) is the factory default setting. • From the Paper menu, set Configure MP to "Cassette" for Multipurpose Feeder or MP Feeder to appear as a menu setting. Paper Saver Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up Paper Saver Ordering Horizontal Reverse Horizontal Reverse Vertical Vertical Print multiple‑page images on one side of a paper. Notes: • Off is the factory default setting. • The number selected is the number of page images that will print per side. Specify the positioning of multiple‑page images when using Paper Saver. Notes: • Horizontal is the factory default setting. • Positioning depends on the number of page images and whether they are in portrait or landscape orientation. 1 This menu appears only in touch‑screen printer models. 2 This menu appears only in non‑touch‑screen printer models.