Lexmark MS818 Users Guide PDF - Page 124

Using MS810de 124 Use On Off 4 Click Submit. To Reduce printer noise. Notes: • Print jobs process at a reduced speed. • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed. • The alarm control and cartridge alarm sounds are turned off. • The printer ignores the Advance Start command. Use factory default settings. Note: This setting supports the performance specifications of the printer. Adjusting Sleep mode 1 From the home screen, navigate to: > Settings > General Settings > Timeouts > Sleep Mode 2 In the Sleep Mode field, select the number of minutes the printer is idle before it enters Sleep mode. 3 Apply the changes. Using Hibernate mode Hibernate is an ultra‑low‑power saving mode. Notes: • Three days is the default amount of time before the printer enters Hibernate mode. • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode. • If the printer is in Hibernate mode, then the Embedded Web Server is disabled. 1 From the home screen, navigate to: > Settings > General Settings 2 Touch Press Sleep Button or Press and Hold Sleep Button. 3 Touch Hibernate > . Restoring factory default settings If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see "Printing a menu settings page" on page 122.