Lexmark MS818 Users Guide PDF - Page 292

Troubleshooting 292 For non‑touch‑screen printer models, press and on the control panel simultaneously for 15 seconds to clear the message and continue printing. If you do not want to accept these risks, then remove the third-party supply or part from your printer and install a genuine Lexmark supply or part. Note: For a list of supported supplies, see the "Ordering supplies" section or go to www.lexmark.com. Not enough free space in flash memory for resources [52] Try one or more of the following: • From the printer control panel, select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. • Delete fonts, macros, and other data stored in the flash memory. • Upgrade to a larger capacity flash memory card. Note: Downloaded fonts and macros that are not previously stored in the flash memory are deleted. Paper changes needed Try one or more of the following: • Select Use current supplies on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press • Cancel the current print job. to confirm. Parallel port [x] disabled [56] Try one or more of the following: • Select Continue to clear the message. For non-touch-screen printer models, press The printer discards any data received through the parallel port. • Select Reset active bin to reset the bin for a linked set of bins. to confirm. Printer had to restart. Last job may be incomplete. Select Continue on the control panel to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. For more information, go to http://support.lexmark.com or contact customer support.