Lexmark T522 Setup Guide - Page 16

Installing an option card Install a MarkNet internal print server to add an Ethernet or Token-Ring port for connecting your printer to a network. Install a MarkNet N2501e or N2401e internal print server if you received either of these cards as part of a multifunction printer upgrade. Install a Tri-Port Adapter to add LocalTalk, serial, and infrared ports. For details on setting up and using the Tri-Port Adapter, refer to the documentation that shipped with the card. Your printer has two connectors that support the following option cards: • Hard disk with adapter card • MarkNet internal print server • USB/Parallel 1284-C Interface Card • Parallel 1284-C Interface Card • Coax/Twinax Adapter for SCS • Tri-Port Adapter Refer to the documentation included with each card for detailed information about that specific card. You need a small Phillips screwdriver to install these options. Note: The Lexmark T522 printer ships with an Ethernet print server already installed. Install a USB/Parallel 1284-C interface card to add a Universal Serial Bus (USB) port or a parallel port. Install a hard disk with adapter card to add additional storage space to your printer. Warning! Electronic components are easily damaged by static electricity. Touch something metal on the printer before you touch the card. Connector 1 Connector 2 1 Follow the steps in "Accessing the printer system board" on page 10. 2 Locate the card connectors on the system board. If you are installing only one card, install it in connector 1. If you are installing two cards, use connector 1 first and then connector 2. 14