Lexmark T522 Setup Guide - Page 3

Getting started 137.16 cm (4.5 ft) 1 Select a well-ventilated place to set up your printer. Allow at least as much space as shown in the illustration. Make sure you have a sturdy, low table or the optional printer stand on which to set the printer. 304.8 mm (12 in.) 508 mm (20 in.) Printer Handhold Power switch cover 500 sheet drawer 304.8 mm (12 in.) 304.8 mm (12 in.) CDs Paper bail and bracket Power cord Operator panel overlay (non-English only) 2 Remove all items from the box except the printer. If any items are missing, contact the place where you bought the printer. Save the carton and packing material in case you need to repack the printer for service or storage. Note: Leave the printer in the box until you are ready to install it. Then ask someone to help you lift the printer using the handholds. Turn off the printer If your printer is already set up, make sure the printer power is off and the power cord and any cables are unplugged before installing any options. Options compatibility Options compatible with the Lexmark T522TM printer are labeled with a colored triangle. Label locations are indicated in the illustrations in this book. Troubleshooting If you encounter a problem while setting up the printer, refer to the Lexmark T522 Publications CD. 1