Lexmark T650 Service Manual - Page 107
SFP stapler assembly, stapler unit assembly, removal on specified time.
View all Lexmark T650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
4062 Error code or message 28x.30 x = bin number 28x.31 x = bin number 28x.32 x = bin number 28x.33 x = bin number 28x.34 x = bin number 28x.35 x = bin number Error contents Page ID complete not clear Applies to: StapleSmart finisher Transport motor encoder not detected Applies to: StapleSmart finisher Transport motor encoder not detected Applies to: StapleSmart finisher Transport motor overspeed failure Applies to: StapleSmart finisher Transport motor underspeed failure Applies to: StapleSmart finisher Sensor (self priming) late failure Applies to: StapleSmart finisher Description/Action A software failure has occurred with the output option. The output option transport motor encoder is not detected upon startup. The transport motor encoder detection is lost during normal operation. The transport motor rotate at the specified speed The transport motor rotate at the specified speed The sensor (self priming) within the stapler assembly does not detect a ready staple in the specified time. Possible repair actions 1. Turn the machine off/on. 2. Replace the output option if problem remains. 1. Check all connections on the output option controller card. 2. Replace the output option if problem remains. 1. Check all connections on the output option controller card. 2. Replace the output option if problem remains. 1. Check all connections on the output option controller card. 2. Replace the output option if problem remains. 1. Check all connections on the output option controller card. 2. Replace the output option if problem remains. 1. Check all the connections on the output option controller card and the stapler assembly. 2. Remove the staple cartridge and remove all jammed staples. If the cartridge is jammed and can not be removed, go to step 3. 3. Remove the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. 4. Manually rotate the drive gears and reset the stapler. Remove all jammed staples then reinstall the stapler assembly. 5. If problem remains, replace the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. Diagnostic information 2-73