Lexmark T650 Service Manual - Page 66
T652, T654 on, Source = Internal
View all Lexmark T650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4062 Error code or message 203.10 203.18 203.20 230.00 230.01 Error contents Redrive motor control failure. Media tray 1 Redrive motor assembly underspeed error. Redrive motor lost encoder failure Paper jam around internal duplex. Source = Internal duplex Sensor (duplex input) lingering jam Source = Internal duplex Description/Action The redrive motor does not reach the proper operating speed at the specified time. The redrive motor assembly does not rotate at the specified speed. The redrive motor is not reporting pulses back to the engine. Page may be jammed in internal duplex area. Media reached the sensor (duplex input) but did not clear it in the specified time. Possible repair actions 1. Remove all media present in media path. 2. Ensure that upper redive assembly is properly installed. 3. Check all connections on the redrive motor assembly. 4. Check all connections on the system card assembly. 5. Replace the redrive motor assembly if problem remains. Go to "Redrive assembly removal (T650, T652, T654)" on page 4-62. 1. Remove all media present in media path. 2. Ensure that upper redive assembly is properly installed. 3. Check all connections on the redrive motor assembly. 4. Check all connections on the system card assembly. 5. Replace the redrive motor assembly if problem remains. Go to "Redrive assembly removal (T650, T652, T654)" on page 4-62. 1. Check all connections on the redrive motor assembly. 2. Check all connections on the system card assembly. 3. Replace the redrive motor assembly if problem remains. Go to "Redrive assembly removal (T650, T652, T654)" on page 4-62 1. Remove all media present in media path. 2. Check for obstructions in media path. 3. Go to sensor (fuser output) service check. See "Sensor (fuser output) service check" on page 2-126. 4. Go to sensor (duplex input) service check. See "Sensor (duplex input) service check" on page 2-127. Go to sensor (duplex input) lingering jam service check. See "Sensor (pass through) late jam service check" on page 2-145. 2-32 Service Manual