Lexmark T650 Service Manual - Page 80
late jam service check on,
View all Lexmark T650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
4062 Error code or message 242.18 242.19 242.52 242.33 242.34 242.35 242.36 242.37 Error contents Pick retry timeout Source = Tray 2 Pick retry timeout Source = Tray 2 Tray 2 pick motor overrun failure Source = Tray 2 Tray 2 not ready Source = Tray 2 Empty tray pick attempted Source = Tray 2 Pick page received while POR not yet done. Source = Tray 2 Sensor (pass through) static jam Source = Tray 2 Sensor (pass through) late jam Source = Tray 2 Description/Action The engine timed out waiting for the tray 2 to report ready before the first pick attempt. The engine timed out waiting for the tray 2 to report ready before a pick retry attempt. The Pick motor encoder continues to detect pulses after the motor was turned off. Tray was not properly pushed into the machine. The pick arm attempted to pick with no media in the tray. Media remains on the sensor (input) during the warm up sequence. Media remains on the sensor (input) during the warm up sequence. The media is late reaching the sensor (pass through) within the specified time. Possible repair actions Turn the machine off/on. Turn the machine off/on. 1. Check all connections on the pick arm assembly. 2. Check all connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. 1. Check the size sensing fingers on the media tray for damage 2. Replace the media tray assembly if problem remains. 3. Check the switch (media size) for proper connection. 4. Replace the switch (media size) if problem remains. Go to "Switch (media size) assembly removal (T650, T652, T654)" on page 4-74. 1. Check the media out actuator for damage. 2. Replace the media out actuator if problem remains. Go to "Tray roller catch assembly removal (T650, T652, T654)" on page 4-81. Go to sensor (pass through) static jam service check. See "Sensor (pass through) static jam service check" on page 2-147. Go to sensor (pass through) static jam service check. See "Sensor (pass through) static jam service check" on page 2-147. Go to sensor (pass through) late jam service check. See "Sensor (pass through) late jam service check" on page 2-145. 2-46 Service Manual