Lexmark T650 Service Manual - Page 96
catch assembly removal
View all Lexmark T650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
4062 Error code or message 245.08 245.10 245.13 245.16 245.17 245.18 245.19 245.33 245.34 Error contents Sensor (pass through) lingering jam Source = Tray 5 Sensor (pass through) late jam Source = Tray 5 Sensor (pass through) static jam Source = Tray 5 Sensor (pass through) late jam Source = Tray 5 Media tray pulled jam Source = Tray 5 Pick retry timeout Source = Tray 5 Pick retry timeout Source = Tray 5 Tray 5 not ready Source = Tray 5 Empty tray pick attempted Source = Tray 5 Description/Action Media reached the sensor (pass through) within the specified time but did not clear it within the specified time. The media is late reaching the sensor (pass through) within the specified time. Media remains on the sensor (input) during the warm up sequence. The media is late reaching the sensor (pass through) within the specified time. A media tray above the source tray was pulled during the printing process. The engine timed out waiting for the tray 5 to report ready before the first pick attempt. The engine timed out waiting for the tray 5 to report ready before a pick retry attempt. Tray was not properly pushed into the machine. The pick arm attempted to pick with no media in the tray. Possible repair actions Go to sensor (pass through) lingering jam service check. See "Sensor (pass through) lingering jam service check." on page 2-146. Go to sensor (pass through) late jam service check. See "Sensor (pass through) late jam service check" on page 2-145. Go to sensor (pass through) static jam service check. See "Sensor (pass through) static jam service check" on page 2-147. Go to sensor (pass through) late jam service check. See "Sensor (pass through) late jam service check" on page 2-145. 1. Remove all media present in media path. 2. Close all media trays. Turn the machine off/on. Turn the machine off/on. 1. Check the size sensing fingers on the media tray for damage 2. Replace the media tray assembly if problem remains. 3. Check the switch (media size) for proper connection. 4. Replace the switch (media size) if problem remains. Go to "Switch (media size) assembly removal (T650, T652, T654)" on page 4-74. 1. Check the media out actuator for damage. 2. Replace the media out actuator if problem remains. Go to "Tray roller catch assembly removal (T650, T652, T654)" on page 4-81. 2-62 Service Manual