Lexmark T650 Service Manual - Page 111
SFP stapler assembly,
View all Lexmark T650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
4062 Error code or message 28x.43 x = bin number 28x.44 x = bin number 28x.45 x = bin number 28x.46 x = bin number 28x.47 x = bin number Error contents Right tamper does not move to home position failure. Applies to: StapleSmart finisher Eject home position jam Applies to: StapleSmart finisher Eject home position jam Applies to: StapleSmart finisher Paddle home position jam Applies to: StapleSmart finisher Paddle home position jam Applies to: StapleSmart finisher Description/Action The sensor (right tamper HP) does not detect that the tamper has reached home position. The sensor (eject HP) does not detect that the eject mechanism is operating. The sensor (eject HP) does not detect the home position upon completion of normal media eject operation. The sensor (paddle HP) does not detect that the paddle is operating. The sensor (paddle HP) does not detect the home position upon completion of normal paddle operation. Possible repair actions 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the right tamper motor assembly. Go to "SFP stapler assembly tamper drive motor assembly removal" on page 4-180. 4. Replace the sensor (tamper HP). Go to "SFP stapler assembly sensor (tamper HP left and right) removal" on page 4-187. 4. Replace the output option if problem remains. 1. Check all the connections on the output option controller card. 2. Replace the output option if problem remains. 1. Check all the connections on the output option controller card. 2. Replace the output option if problem remains. 1. Check all the connections on the output option controller card. 2. Check the sensor (paddle HP) for damage and replace if needed. Go to "SFP stapler assembly sensor (paddle HP) removal" on page 4-185. 3. Replace the output option if problem remains. 1. Check all the connections on the output option controller card. 2. Check the sensor (paddle HP) for damage and replace if needed. Go to "SFP stapler assembly sensor (paddle HP) removal" on page 4-185. 3. Replace the output option if problem remains. Diagnostic information 2-77