Lexmark T650 Service Manual - Page 67
Source = Internal, Sensor input late jam
View all Lexmark T650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
4062 Error code or message 230.02 230.03 230.04 230.05 230.06 230.07 230.08 Error contents Sensor (duplex input) late jam Source = Internal duplex Sensor (duplex input) bounce Source = Internal duplex Sensor (input) late jam from duplex Source = Internal duplex sensor (duplex input) lingering jam Source = Internal duplex Sensor (input) late jam from duplex Source = Internal duplex Sensor (input) late jam from duplex Source = Internal duplex Internal duplex drive motor load error Source = Internal duplex Description/Action Media is late reaching the sensor (duplex input) within the specified time. The sensor (duplex input) rebounded once the trailing edge of the media passed. Media is late reaching the sensor (input) within the specified time during the second side printing using the internal duplex. Media reached the sensor (duplex input) but did not clear it in the specified time. Media is late reaching the sensor (input) within the specified time during the second side printing using the internal duplex. Media is late reaching the sensor (input) within the specified time during the second side printing using the internal duplex. The internal duplex drive motor assembly has failed or caused high mechanical load during warm up sequence. Possible repair actions Go to sensor (duplex input) late jam service check. See "Sensor (duplex input) late jam service check." on page 2-141. Go to sensor (duplex input) service check. See "Sensor (duplex input) service check" on page 2-127. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. Go to sensor (duplex input) lingering jam service check. See "Sensor (pass through) late jam service check" on page 2-145. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-129. 1. Remove all media present in media path. 2. Check all connections on the duplex media entrance drive motor assembly. 3. Check all connections on the system card assembly. 4. Replace the duplex drive motor assembly if problem remains. Go to "Duplex drive motor assembly removal (T652, T654)" on page 4-19. Diagnostic information 2-33