Lexmark T650 Service Manual - Page 153
System card, assembly removal T650, T652, T656 on, Too many options
View all Lexmark T650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
4062 Error code or message 982.01 Error contents Communication failure 982.02 Communication failure 982.03 Communication failure 982.04 Output option communication failure. 982.06 Paperport failure 982.07 982.11 Too many options installed Paperport failure 982.12 Paperport failure 982.13 Hot plug failure Description/Action Possible repair actions Paper port communication device detected a validation failure. Paper port communication device detected a framing error or the receive buffer overflowed. Paper port communication device timed out during communication. An output option was not fully seated onto the printer or has been removed while the main power is turned on. Paper port priortizer error. Option device message was not read by the priortizer. Exceeded the maximum number of input or output options. Command response error on the paper port. Response is too large for the communications buffer. Bad bottom trunk on the paper port. The printer has detected a hot plug of an optional device. Low-level error on paper port. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 1. Turn the main power off. 2. Remove and reinstall the output option. 3. Turn the main power back on. 4. Check all output option interface connections if problem remains. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Remove the appropriate input or output options. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Replace the system card assembly. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Power the machine off/on after all options are installed. Diagnostic information 2-119