Lexmark T650 Service Manual - Page 186

4062 Step Check Yes No 4 Check the above sensor for proper connection. Is the above sensor connected properly? 5 Perform a print test using the output option. Does the error continue? Replace the sensor (output pass through). Replace the connection. Go to "High capacity stacker sensor (pass through) removal" on page 4-144. Go to "5-bin mailbox sensor (pass through) removal" on page 4-90. Go to "Output expander sensor (pass through) removal" on page 4-169. Replace the output Problem solved. option. Sensor (output pass through) static jam service check Step Check Yes 1 Check the media path for partially fed or jammed media. Go to step 2. Is the media path free from partially fed or jammed media? 2 Check the sensor (output pass through) for proper operation. Go to step 4. 1. Enter the diagnostic mode 2. Select Output bin tests 3. Select Sensor test 4. Select Output bin x 5. Observe the line item "passthru" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. No Remove any prestaged or jammed media. Go to step 3. 2-152 Service Manual