Lexmark T650 Service Manual - Page 108
Invalid tamper motor, manager status
View all Lexmark T650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
4062 Error code or message 28x.36 x = bin number Error contents Stapler drive motor jammed Applies to: StapleSmart finisher 28x.37 x = bin number 28x.38 x = bin number Invalid tamper motor manager status Applies to: StapleSmart finisher Staple ready home position jam Applies to: StapleSmart finisher Description/Action Possible repair actions The stapler assembly has jammed while stapling or the stapler drive motor has failed. A software failure has occurred with the output option. 1. Check all the connections on the controller card and the stapler assembly. 2. Remove the staple cartridge and remove all jammed staples. If the cartridge is jammed and can not be removed, go to step 3. 3. Remove the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. 4. Manually rotate the drive gears and reset the stapler. Remove all jammed staples then reinstall the stapler assembly. 5. If problem remains, replace the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. 1. Turn the machine off/on. 2. Replace the output option if problem remains. The sensor (self priming) within the stapler assembly does not detect a ready staple in the specified time after the staple job was sent. 1. Check all the connections on the controller card and the stapler assembly. 2. Remove the staple cartridge and remove all jammed staples. If the cartridge is jammed and can not be removed, go to step 3. 3. Remove the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. 4. Manually rotate the drive gears and reset the stapler. Remove all jammed staples then reinstall the stapler assembly. 5. If problem remains, replace the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. 2-74 Service Manual