Lexmark X642E Menus and Messages - Page 102
for Flash Memory, Continue, Cancel Job
UPC - 734646258746
View all Lexmark X642E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Attendance messages Message Meaning Action 31.yy Replace defective print cartridge The MFP detects a defective print cartridge within 10-20 seconds after the top cover is closed. Remove the defective print cartridge, and install a nondefective print cartridge for printing to continue. During the 10-20 second interval before the defective print cartridge is detected, the MFP may continue to print pages; however, the pages are not reprinted once the new print cartridge is installed. 32.yy Replace unsupported print cartridge The MFP detects an unsupported print cartridge within 10-20 seconds after the top cover is closed. Remove the unsupported print cartridge, and install a supported print cartridge for printing to continue. During the 10-20 second interval before the unsupported print cartridge is detected, the MFP may continue to print pages; however, the pages are not reprinted once the new print cartridge is installed. 34 Short paper The length of the print media is too short to print the formatted data. Touch Continue to clear the message and continue printing. The MFP does not automatically reprint the page that prompted the message. Make sure the Paper Size setting in the Paper Menu is correct for the size of print media used. If MP Feeder Size is set to Universal, make sure the print media is large enough for the formatted data. Touch Cancel Job to cancel the current job if needed. 35 Insufficient memory to support Resource Save feature The MFP lacks the memory needed to enable Resource Save. This message usually indicates too much memory is allocated for one or more of the MFP link buffers. Touch Continue to disable Resource Save and continue printing. Install additional memory. 37 Insufficient memory for Flash Memory Defragment operation The MFP cannot defragment flash Touch Continue to clear the message. memory because the memory used to store undeleted flash resources is full. To perform the defragment operation, install additional memory, or delete fonts, macros, and other data to free some memory space. 37 Insufficient memory, some Held Jobs were deleted Held jobs are deleted in order to process the current job. The message appears once per job. Touch Continue to clear the message and continue printing. To avoid this error in the future for other jobs, install more memory. Touch Cancel Job to cancel the current job if needed. 37 Insufficient memory The MFP cannot collate the job to collate job because the memory is full. Touch Continue to print the pages processed before the memory became full. Some memory frees up, so collating begins for the remainder of the print job. For example, if a 50-page print job is sent, and 10 copies are requested, and the MFP runs out of memory at page 30, pages 1-30 would collate and print 10 copies. The MFP would then print and collate pages 31-50 and print 10 copies of these pages. Touch Cancel Job to cancel the current job if needed. 102