Lexmark X864 Forms and Bar Code Technical Reference - Page 17

PCL5 Emulation escape sequences Command Esc(s#P or AEC)s#P Function/Parameters Determines the location of human-readable text printed with the bar code. 0 = Use default value 1 = Do not print text 2 = Print text embedded 3 = Print text half embedded 4 = Print text under bar code 5 = Print text above bar code Add the numbers listed below to produce the corresponding effect: 10 = 10 = 20 = 100 = Prints UPC-A checksum at middle left of the bar code instead of the bottom left Prints start/stop * characters with Code 3 of 9 text Formats German postal bar codes Prints the checksum character with text For the UPC-E symbologies, checksum characters are always printed if human-readable text is specified. The checksum characters are printed half-height if 100 is added to the p parameter, and are printed the same height as the text if 100 is not added to the p parameter. Example: Esc(s13p24670T Selects Code 3 of 9 with human-readable text half embedded and start/stop * characters. Because the v, b, s and h parameters are not specified, their values default to: v b1, s1 b2, s2 h .4 inch .01 inch .03 inch automatically sized Courier Bold One-dimensional bar codes 14