Lexmark X864 Forms and Bar Code Technical Reference - Page 68
To set an AEC from the printer control panel, Alt ESC Code
View all Lexmark X864 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
The # represents the ASCII code of the AEC. Use one of the ASCII codes listed: Command Function/Parameter Esc**#J ASCII code Character 34 " or 35 # AEC**#J 36 $ 47 / 63 ? 92 \ 123 { 124 | 125 } 126* ~ * Default value Example: Esc**124J changes the AEC to "|" FREESCAPE emulation can be deactivated by setting the AEC value to that of the escape character (decimal 27, hex 1B). To deactivate FREESCAPE emulation, send the command: AEC**27J. To set an AEC from the printer control panel: 1 From the Forms Card menu, select Alt ESC Code. 2 Select On to enable the AEC. 3 From the Forms Card menu, select Alt ESC Code Char. 4 Select an AEC from the menu. You can disable the AEC by selecting Off from the Alt ESC Code menu. FREESCAPE emulation 65
FREESCAPE emulation
65
The
#
represents the ASCII code of the AEC. Use one of the ASCII codes listed:
Example:
FREESCAPE emulation can be deactivated by setting the AEC value to that of the escape character
(decimal 27, hex 1B). To deactivate FREESCAPE emulation, send the command:
AEC
**27J.
To set an AEC from the printer control panel:
1
From the Forms Card menu, select
Alt ESC Code
.
2
Select
On
to enable the AEC.
3
From the Forms Card menu, select
Alt ESC Code Char
.
4
Select an AEC from the menu.
You can disable the AEC by selecting
Off
from the Alt ESC Code menu.
Command
Function/Parameter
Esc
**#J
or
AEC
**#J
ASCII code
Character
34
“
35
#
36
$
47
/
63
?
92
\
123
{
124
|
125
}
126*
~
* Default value
Esc
**124J
changes the AEC to “|”