Lexmark X864 Forms and Bar Code Technical Reference - Page 51
Two-dimensional bar codes, Bytes, Range, Default, if not, specified, Definition
View all Lexmark X864 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Two-dimensional bar codes Bar code descriptor for PDF417 (Lexmark) Bytes 0-1 MSB LSB Range Symbology Symbology n/a ID byte 1 ID byte 2 (00x) (03x) 2-3 Reserved Units 0=Default 1=1/300" units 2=1/600" units 3=1/1200" units 4-5 X X 240-12000 (dec) dimension dimension byte 1 (in byte 2 (in Units) units) Default (if not specified) Definition n/a Required. The two bytes with values 00 and 03 (hex) or 0 and 3 (dec) signify the symbology. All bar code descriptors must reserve the first two bytes for the symbology ID so the remaining bytes can be interpreted accordingly because most descriptors are of different sizes and information. • 0 or 2 (dec) or • 00 or 02 (hex) Optional. Sets the units used in specifying any further parameters or dimensions. The default value is 1/600", which is either 00 (hex) or 02 (hex). • 945 (dec) or • 03 B1 (hex) Optional. Sets the X dimension of the module (white or black rectangle) in 100th of an inch. Note: Values that go beyond the defined range will be appropriately clipped and set to the minimum and maximum values. To set the X dimension to default at 600 dpi requires a value of 9.45, which is specified as 945 (dec) or 03 B1 (hex). The Units enumeration would be set to 02 (hex) (or 00 (hex)), and these two bytes would be 03 (hex) and B1 (hex). Two-dimensional bar codes 48