Lexmark X864 Forms and Bar Code Technical Reference - Page 28
Two-dimensional bar codes, Bar code descriptor for Codablock F
View all Lexmark X864 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Two-dimensional bar codes Bar code descriptor for Codablock F Field Name Esc (s#T Type name Range na Default (if not specified) n/a Esc (s#1,#2,[#3]V Int Min: 3 (dec) or 16 (dec) 03 (hex) or Max: No maximum 10 (hex) Int Min: 2 rows Max: 44 rows 2 (dec) or 02 (hex) Esc (s#1]B Int Min: 4 columns 20 (dec) Max: 103 columns or 14 (hex) Int Min: 6 (dec) Min. value of B1 is 1, but or may be an unreadable symbol. 06 (hex) Max: There is no max value for B1, but larger barcodes may use up too much memory. Description Required. 24840T Optional. Selects bar height. Bar height in 1/72", same units as fonts. Note: Values from 0 to 2 are the same as the default. Optional for Forms and Bar Code Card, required for HP BarDIMM. (See "Deviations" chapter of this Technical Reference.) Requested number of rows in the Codablock F symbol. Optional. Requested number of columns in the Codablock F symbol. Optional. Selects bar width. HP BarDIMM Deviations: The HP BarDIMM Pro uses the PCL5 Height command "V1" to specify the single line bar Height of the Codablock F bar code, IE: the height of one of the rows contained in the bar code. No provision is made to specify the absolute height of the Codablock F symbol. Parameters V2 and V3 are derived from the ELMICRON Specification. The HP BarDIMM Pro specification specifies that the Codablock V parameter #1 is the "single line bar height in 1/60". But that is incorrect-it is actually in 1/72". Two-dimensional bar codes 25