Lexmark X945e Setup Guide - Page 33
Using the multipurpose feeder, Paper guides
View all Lexmark X945e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 4 Load the paper stack with the recommended print side faceup. 5 Make sure the paper guides are secure against the edges of the paper. 6 Insert the tray into the printer. 7 If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting for the tray from the control panel. Using the multipurpose feeder 1 Paper guides 2 Size indicators 3 Stack height limiter 33
3
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten
the edges on a level surface.
4
Load the paper stack with the recommended print side faceup.
5
Make sure the paper guides are secure against the edges of the paper.
6
Insert the tray into the printer.
7
If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting
for the tray from the control panel.
Using the multipurpose feeder
1
Paper guides
2
Size indicators
3
Stack height limiter
33