Lexmark X945e Setup Guide - Page 52
Paper frequently jams, Check the paper, Make sure there is not too much paper in the paper tray - troubleshooting
View all Lexmark X945e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Paper frequently jams These are possible solutions. Try one or more of the following: Check the paper Use recommended paper and other specialty media. For more information, see the chapter about paper and specialty media guidelines. Make sure there is not too much paper in the paper tray Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder. Check the paper guides Move the guides in the tray to the correct positions for the paper size loaded. Has the paper absorbed moisture due to high humidity? • Load paper from a fresh package. • Store paper in its original wrapper until you use it. Contacting Customer Support When you call Customer Support, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution. You need to know your printer model type and serial number. For more information, see the label on the inside top front cover of the printer. The serial number is also listed on the menu settings page. In the U.S. or Canada, call (1-800-539-6275). For other countries/regions, visit the Lexmark Web site at www.lexmark.com. Administrative settings Adjusting the brightness of the display If you are having trouble reading your display, the LCD brightness can be adjusted through the Settings menu. 1 Make sure the printer is on and Ready appears. 2 On the home screen, touch . 3 Touch Settings.. 4 Touch General Settings. 5 Touch repeatedly until Brightness appears. 6 Touch to decrease the brightness, or touch to increase the brightness. Brightness settings can be adjusted from 5-100 (100 is the factory default setting). 7 Touch Submit. 8 Touch . 52