LiftMaster CSW24VDC CSW24VDC Installation Manual - Page 20
Step 10 Dual Gates Only, Dual Gates Only
View all LiftMaster CSW24VDC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
INSTALLATION STEP 10 DUAL GATES ONLY There are two options for dual gate communication: wired or wireless. Follow the directions according to your application. Do not use wired and wireless communication simultaneously. Wired dual gate applications will have a longer battery standby time than wireless applications. COM LINK B A WIRELESS DUAL GATES TO ACTIVATE THE WIRELESS FEATURE: 1. Choose an operator to be the network primary operator. All wireless accessories will need to be programmed to the primary operator. NOTE: We recommend that all accessories and board configurations are set on the primary operator. 2. Press and release the LEARN button on the primary operator. The green XMITTER LED will light. 3. Press and release the LEARN button again on the primary operator. The yellow NETWORK LED will light. 4. Press and release the OPEN test button to assign this operator as network primary. 5. Press and release the LEARN button on the second operator. The green XMITTER LED will light. 6. Press and release the LEARN button again on the second operator. AC & BATT FAIL The yellow NETWORK LED will light. BACKDRIVE 7. Press and release the CLOSE test button to assign this operator as network second. Both operators will beep and the yellow NETWORK LEDs will turn off indicating programming is successful. TO DEACTIVATE THE WIRELESS FEATURE: 1. Press and release the LEARN button on either operator. The green XMITTER LED will light. 2. Press and release the LEARN button again on the same operator. The yellow NETWORK LED will light. 3. Press and hold the LEARN button for 5 seconds. The yellow NETWORK LED will blink (operator will beep) then turn off indicating successful deactivation. Repeat the steps for the other operator. 19