MSI 975X PLATINUM User Guide - Page 60

BIOS Setup Suspend Time Out (Minute) If system activity is not detected for the length of time specified in this field, all devices except CPU will be shut off. Setting options: [Disabled], [1 Min], [2 Min], [4 Min], [8 Min], [10 Min], [20 Min], [30 Min], [40 Min], [1 Hour]. Power Button Function This feature sets the function of the power button. Setting options: [Power Off] The power button functions as normal power off button. [Suspend] W hen you press the power button, the computer enters the suspend/ sleep mode, but if the button is pressed for more than four seconds, the computer is turned off. Restore on AC Power Loss This setting specifies whether your system will reboot after a power failure or interrupt occurs. Setting options: [Off] Leaves the computer in the power off state. [On] Leaves the computer in the power on state. [Last State] Restores the system to the previous status before power failure or interrupt occurred. Wakeup Event Setup Press and the following sub-menu appears. Resume by PCI-E Device The item allows the activity of the PCI-E device to wake up the system. Setting options: [Disabled], [Enabled]. Resume by PCI Device (PME#) W hen setting to [Enabled], this setting allows your system to be awakened from the power saving modes through any event on PME (Power Management Event). Setting options: [Disabled], [Enabled]. Resume From S3 by USB The item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state. Setting options: [Disabled], [Enabled]. Resume by RTC Alarm This is used to enable or disable the feature of booting up the system on a scheduled time/date from the S3, S4, and S5 power off state. Setting options: [Disabled], [Enabled]. 3-17