Magnavox MRD723B Owner's Manual - English - Page 60
Manual Wireless
View all Magnavox MRD723B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
6. Use [Î / ï] to select "Next", then press [OK]. Next Retry Cancel Access Point Setting (Auto Scan) Please confirm the setting. SSID : Access 1 Security : XXXXX WEP/WPA Key : XXXXXXX 3/7 7. Use [Î / ï] to select "Auto" or "Manual", then press [OK]. • If you select "Auto": Follow step 4 in "Auto (Wired)" on page 56. • If you select "Manual": Follow steps 3 to 12 and 14 to 16 in "Manual (Wired)" on page 57. D Note • The internal wireless LAN supports following specifications. - Wireless standards - Frequency spectrum - Security protocol : IEEE 802.11 b/g/n : 2.4 GHz : WEP / WPA / WPA2 Manual (Wireless) Set up the connection to the wireless router manually by entering the wireless network name (SSID). In the following cases, select "Manual"(wireless) to set each setting as necessary. - When connection test failed with the setting of "Auto Scan"(wireless). 1. Follow steps 1 to 2 in "Auto Scan (Wireless)" on page 59. 2. Use [Î / ï] to select "Manual", then press [OK]. 3. Wireless router name (SSID) entry screen will appear. Enter the wireless network name (SSID) using cursor buttons, number buttons and color key, then press [RED]. 4. Security mode select screen will appear. Select the desired security mode, then press [OK]. • If you select "None", please go to step 6. Access Point Setting (Manual) Cancel Please select the security mode. None WEP WPA-PSK(TKIP) WPA-PSK(AES) WPA2-PSK(TKIP) WPA2-PSK(AES) 2/7 5. "WEP / WPA Key" entry screen will appear. Enter the WEP / WPA / WPA2 key of the selected wireless network using cursor buttons, number buttons and color key, then press [RED]. • If you do not know the WEP / WPA / WPA2 key for your Wireless network, ask your ISP or the person who set up your Wireless Network. 6. Use [Î / ï] to select "Next", then press [OK]. EN-60 Continued on next page.