Marantz DV7600 DV7600 User Manual - Page 16

4 Getting Started 1 Switch the player on. If you're playing a DVD or Video CD, also turn on your TV and make sure that it is set to the correct video input. 2 Press OPEN/CLOSE to open the disc tray. 3 Load a disc. Load a disc with the label side facing up, using the disc tray guide to align the disc (if you're loading a doublesided DVD disc, load it with the side you want to play face down). 4 Press 3 (PLAY) to start playback. If you're playing a DVD or Video CD, a menu may appear (see page 17). Note • For one-sided, two-layer discs containing movies, etc., there may be a short image stoppage at the point where the layers change. This is not a malfunction. Basic playback controls Button 3 What it does Starts playback. DVD and Video CD: if the display shows RESUME, playback starts from the resume point. 8 Pauses a disc that's playing. 7 Stops playback. DVD: Display shows RESUME. Press 7 (STOP) again to cancel the resume function. 1 1. Press for fast reverse scanning during play. 2. Press again to increase the scan speed. (Super Audio CD, Video CD and CD have 3 scan speeds; DVD have 4.) Press 3 (PLAY) to resume normal playback. ¡ 1. Press for fast forward scanning during play. 2. Press again to increase the scan speed. (Super Audio CD, Video CD and CD have 3 scan speeds; DVD have 4.) Press 3 (PLAY) to resume normal playback. 4 Skips to the start of the current track or chapter, then to previous tracks/chapters. ¢ Skips to the next track or chapter. Numbers Playback starts from selected track/chapter number. Playing discs The basic playback controls for playing discs are covered here. Further functions are detailed in the next chapter. Note • If the power is interrupted during Resume STOP, Play or Pause, playback will start again from Resume Point when the power is restored, unless the disc tray is opened and the disc is removed. • The sound is muted during fast forward/reverse scanning of DVD/VCD. Note Important • Throughout this manual, the term 'DVD' means DVDVideo, DVD-Audio and DVD-R/RW. If a function is specific to a particular kind of DVD disc, it is specified. While using the DVD playback controls, you may see the mark displayed on-screen. The mark means that the operation is not allowed by the player and 16 disc.