McAfee IIP-M80K-ISAA Product Guide - Page 17

Unpacking the sensor, Remove the Slide Rail Kit.

Page 17 highlights

McAfee® IntruShield® IPS 4.1 M-8000 Sensor Product Guide Before You Install Unpacking the sensor Unpacking the sensor To unpack the sensor: 1 Open crate. 2 Remove the first accessory box. 3 Verify you have received all parts. These parts are listed on the packing list and in Contents of the sensor box. 4 Remove the primary sensor (M-8000 P). 5 Place the sensor box as close to the installation site as possible. 6 Position the box with the text upright. 7 Open the top flaps of the box. 8 Remove the accessory box within the sensor box. 9 Verify you have received all parts. These parts are listed on the packing list and in Contents of the sensor box. 10 Remove the Slide Rail Kit. 11 Pull out the packing material surrounding the sensor. 12 Remove the sensor from the anti-static bag. 13 Save the box and packing materials for later use in case you need to move or ship the sensor. 14 Remove the secondary sensor (M-8000 S). 15 Repeat Step 5 through Step 13. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

McAfee® IntruShield® IPS 4.1
Before You Install
M-8000 Sensor Product Guide
Unpacking the sensor
Unpacking the sensor
To unpack the sensor:
1
Open crate.
2
Remove the first accessory box.
3
Verify you have received all parts. These parts are listed on the packing list and
in Contents of the sensor box.
4
Remove the primary sensor (M-8000 P).
5
Place the sensor box as close to the installation site as possible.
6
Position the box with the text upright.
7
Open the top flaps of the box.
8
Remove the accessory box within the sensor box.
9
Verify you have received all parts. These parts are listed on the packing list and
in Contents of the sensor box.
10
Remove the Slide Rail Kit.
11
Pull out the packing material surrounding the sensor.
12
Remove the sensor from the anti-static bag.
13
Save the box and packing materials for later use in case you need to move or
ship the sensor.
14
Remove the secondary sensor (M-8000 S).
15
Repeat Step 5 through Step 13.
9