Motorola MC3090G Integration Guide - Page 102

4 - 18 MC3000 Integrator Guide Downloading: "Partition Name" via "Device Parameters" Result was: Success! Press any key to continue Figure 4-14 Downloading Complete Screen 1. On completion, press ENT to return to the IPL menu to select the next partition to download. 2. To exit IPL, select the System Reset item from the IPL menu. TCM Error Messages TCM validates the cells in the partition table when the Execute button is clicked. Cells highlighted in red contain an error. Partition loading is disabled until all errors are corrected. Table 4-5 TCM Error Messages Error Description/Solution Failed to build images: flash file system DLL not loaded! TCM could not load the DLL required to build images for the targeting flash file system. Reinstall TCM or recover the DLL. Failure finding directory xxx Building process failed because directory xxx was not found. Failure creating volume Building process failed because a certain disk volume could not be created. Failure adding system file to image Build process failed because TCM failed to add a certain system file to the disk image. INVALID PATH The path for the image file to build is not valid. Nothing Selected To Build In the Config Build window, no item is selected to build. Illegal ESS ID In the Build ESSID Partition window, no ESS ID was entered or the ESS ID entered was illegal. Disk Full TCM failed to create hex image file at the selected path. Check available disk space. Target Disk Full Build process failed because TCM failed to add file to the image of a disk volume. Remove some files or increase the disk size. Hex file is READ ONLY The hex image file to be created exists and is read only. Delete the existing file or change its attribute. Error opening the file xxx with write access TCM could not open file xxx with write access. Check if file is in use.